Ask us about
the...BS200 w/ Interior Light (Part # 103649)
Child Alarms
The
Bus-Scan ® Child Reminder reminds
a driver to walk to the back of the school bus or van at the end of each trip and visually
check for remaining children or lost personal items.
Here's how it works: At the end of the run, turning off the ignition
(or other activation source) activates a reminder tone for the driver to begin a seat
check. If a switch at the back of the bus is not pressed within one minute (or other
custom time) the bus horn will sound. Once the bus horn sounds, the ignition will need to
be recycled and the driver still MUST walk to the back of the bus
to press the button.
The Bus Scan 200 Wireless is available with an interior light option which
illuminates the interior lights while the driver is doing their seat check.
The interior light will remain on for 30 seconds after the switch (back
button) is deactivated and the driver exits the vehicle. (Part # 103649)
RTI offers both Hard Wire and a Wireless Solutions.
The Bus Scan Wireless can be installed quickly and does not require a mechanic to run or
install wires at the back of the bus or van.
RTI is the ONLY company to offer a Wireless Child Reminder Solution.
The Bus Scan Wireless will save you time and money on installation.
New Illinois Law
(Read Below)
Public Act 095-0260
| |
Public Act 095-0260
|
| SB0166 Enrolled |
LRB095 05332
DRH 25415 b |
|
|
AN ACT concerning
transportation.
|
Be it
enacted by the People of the State of Illinois,
|
represented in the General
Assembly:
|
Section 5. The Vehicle
Code is amended by adding Section |
12-816 as follows:
|
(625 ILCS 5/12-816 new) |
Sec.
12-816. Post-trip inspection policy for school
buses. |
(a) In
order to provide for the welfare and safety of
|
children who are
transported on school buses throughout the
|
State of Illinois, each
school district shall have in place, by
|
January 1, 2008, a policy
to ensure that the school bus driver
|
is the last person leaving
the bus and that no passenger is |
left behind or remains on
the vehicle at the end of a route, a
|
work shift, or the work
day. |
(b) If a
school district has a contract with a private
|
sector school bus company
for the transportation of the |
district's students, the
school district shall require in the
|
contract with the private
sector company that the company have
|
a post-trip inspection
policy in place. This policy and |
procedure shall, at a
minimum, require the school bus driver,
|
before leaving the bus at
the end of each route, work shift, or
|
work day, to walk to the
rear of the bus and check in and under
|
each seat for sleeping
children. |
| |
(c) Before
this inspection, the school bus driver shall
|
activate the interior
lights of the bus to assist the driver in
|
seeing in and under the
seats during a visual sweep of the bus. |
(d) This
policy may include, at the discretion of the
|
school district, the
installation of a mechanical or electronic
|
post-trip inspection
reminder system which requires the school
|
bus driver to walk to the
rear of the bus to deactivate the |
system before the driver
leaves the bus. The system shall |
require that when the
driver turns off the vehicle's ignition
|
system, the vehicle's
interior lights must illuminate to assist
|
the driver in seeing in and
under the seats during a visual |
sweep of the bus.
|
Section 99. Effective
date. This Act takes effect upon |
becoming law. |
Effective Date: 8/17/2007
SOLUTION (for
existing Bus-Scan Users)
Bus-Scan Add On Light
Module
Part # 104068
(call for price)
|
|
RTI Part # 101684
BS100RF - Wireless (Our # 1 Selling
System)
RTI Part # 103649
BS200RF - Wireless NEW!!!
RTI Part # 101533
BS100 Hardwire
Thomas Part # 52005398
or 52007153 |
Company Info